First find the tolerance band, it will typically be gold ( 5%) and sometimes silver (10%).
Starting from the other end, identify the first band - write down the number associated
with that color; in this case Blue is 6. Now 'read' the next color, here it is red so
write down a '2' next to the six. (you should have '62' so far.) Now read the third or
'multiplier' band and write down that number of zeros. In this example it is two so we get
'6200' or '6,200'. If the 'multiplier' band is Black (for zero) don't write any zeros
down. If the 'multiplier' band is Gold move the decimal point one to the left. If the resistor has one more band past the tolerance band it is a
quality band. Read the number as the '% Failure rate per 1000 hour' This is rated assuming
full wattage being applied to the resistors. (To get better failure rates, resistors are
typically specified to have twice the needed wattage dissipation that the circuit
produces)
1% resistors have three bands to read digits to the left of
the multiplier. They have a different temperature coefficient in order to provide the 1%
tolerance.
กก |
|
